Truck branding

Truck Branding in Dubai That Turns Every Box Body Into a Highway Billboard

A 3-ton box body has more flat advertising space than most roadside signs. We design it to read at highway speed, fit cast vinyl over rivets and ribs, and get the Mada Media permit, so your trucks sell while they deliver.

Get a free quote WhatsApp Call

3-ton truck wraps from AED 2,000
Cast vinyl fitted over rivets
Mada Media permit handled

5,000+projects delivered

AED 2,000
3-ton truck wraps from: AED 6,000+
Typical full box-truck wrap: 3-7 days
Mada Media permit timeline: 3-5 years
Cast vinyl life in UAE heat

At a glance

Truck Branding in brief

Truck branding in Dubai starts from AED 2,000 for a 3-ton truck at Printajo, before the Mada Media advertising permit. Typical market prices for a 3-ton or box truck are AED 2,000-3,500 for partial graphics and AED 6,000-9,500 for a full wrap. We print on cast vinyl that conforms to rivets and corrugated panels, and handle the permit.

By body type

What works on each kind of truck

The body decides the design. A smooth box, a ribbed container and a fabric curtain need different materials and layouts.

Truck	Best coverage	Surface to plan for	Price guide
Pickup	Door logos, tailgate and bed sides	Curved doors and wheel arches	Quoted per vehicle
3-ton box truck	Full box sides and rear, cab doors	Rivet lines and panel joints	From AED 2,000
7-ton box truck	Full box sides and rear	Long panels with ribs or rivets	Quoted per side
Curtain-sider	Printed curtain or rear doors	Fabric that moves and is opened daily	Quoted per side
Trailer	Both sides and rear doors	Corrugated or riveted walls	Quoted per side

Typical market range for a 3-ton or box truck: partial AED 2,000-3,500, full AED 6,000-9,500, wrap only. Read our truck wrap planning guide for more detail by body type.

Hard surfaces

Rivets, ribs and joints: where cheap truck graphics fail first

Most box bodies and trailers are built from panels held by rows of rivets, and many have corrugated ribs. Vinyl laid flat over them looks fine on day one. After a few weeks of 50°C sun it lifts around each rivet head, traps dirt in the ribs and starts to tear at the joints. It is one of the most common wrap mistakes we see in Dubai.

We use cast vinyl from 3M, Avery Dennison, Arlon, Mactac or Orafol, which conforms into those shapes and stays there, and we press it into each rivet and rib rather than bridging the gap. Seams are placed along panel joints, not across your logo, so the design reads as one image from the road.

Cast film worked into each rivet head and rib
Seams hidden on panel joints, away from text
Cab and box designed as one, so they line up when parked

Chat on WhatsApp

Design for distance

Designed for Emirates Road at speed, and the loading bay at dusk

People see a truck from further away and for longer than a car. That changes what belongs on the panel.

Big name, few words

Company name and one line on what you move or deliver. On a 7-ton side panel the letters can be huge, so use that instead of adding more text.

High contrast for low light

Many trucks run early mornings and after sunset. Dark lettering on a light box, or white on a strong colour, stays readable in headlights and street light.

Rear doors for the queue

The rear is read by drivers stuck behind you on Sheikh Mohammed Bin Zayed Road. Put the phone number and website there.

Clear of safety items

Lights, reflectors, plates and required markings stay uncovered. We design around them from the first mockup, following the vehicle advertising permit rules.

How it works

How a truck wrap is planned and fitted

Large bodies are measured and printed in panels, so planning matters more than on a car or van.

01Measure the bodySame daySend photos of all sides and the body dimensions, or we measure on site. We note rivet lines, ribs, doors and any tail lift.
02Panel layout and mockup1-2 daysWe draw the design on your body type and mark where each printed panel joins, so seams fall on joints and not on lettering.
03Permit3-7 daysThe mockup, trade licence and Mulkiya go to Mada Media for the Permit to Advertise on Vehicles.
04Deep clean and prepInstall dayDiesel film, road dust and old adhesive are removed first. Graphics fail on dirty panels, not on clean ones.
05Print, fit and press into rivets2-5 daysCast vinyl with UV lamination is fitted panel by panel and worked into every rivet and rib before handover.

Start on WhatsApp

Who it is for

Trucks that already drive past your next customer

Logistics and freight

Box trucks and trailers running between Jebel Ali, Al Quoz and Sharjah industrial areas.

FMCG and distribution

Delivery trucks that stop outside supermarkets and restaurants every day, in front of the people who buy.

Movers and storage

Large, slow-moving bodies in residential streets: the ideal place for a number and a website.

Construction and equipment

Pickups and flatbeds on site, where a clear name and logo show who is doing the job.

Several trucks to brand?

We roll out one design across mixed models with batch permits.

FAQs

Frequently asked questions

How much does it cost to wrap a 3-ton truck in Dubai?

Our 3-ton truck wraps start from AED 2,000 before the Mada Media permit fee. In the wider market, partial graphics on a 3-ton or box truck usually cost AED 2,000-3,500 and a full wrap AED 6,000-9,500. The final price depends on coverage and design, and you get it in writing first.

Can vinyl graphics go over rivets and corrugated truck panels?

Yes, if it is cast vinyl and fitted properly. Cast film from 3M, Avery Dennison, Arlon, Mactac or Orafol is pressed into each rivet and rib so it does not lift. Cheaper calendered vinyl shrinks in heat and pulls away from rivets, which is why we do not use it on truck bodies.

Can you brand a curtain-sider truck?

Yes. Because the curtain is opened and moved every day, we plan the design so it still reads when the curtain is pulled tight and keep key details on the rear doors and cab, which do not move. Send photos and dimensions for a quote per side.

Should the truck cab and the box body be branded together?

It looks better when they are. We design the cab doors and box as one layout so the logo, colours and lines match when the truck is seen side on. Branding the box only is fine on a tight budget, as it carries most of the space.

Will my truck graphics still be readable at night?

They will be much more readable if the design uses strong contrast, such as dark text on a light body or white on a deep colour. Lights, reflectors and plates always stay uncovered. Tell us if your trucks run mostly at night so we design for low light from the start.

Do you brand trailers and prime movers?

Yes, trailers are quoted per side because sizes vary. We brand both side walls and the rear doors, and can add matching door logos to the prime mover. For many trailers or trucks at once, see our fleet branding service.

Not answered here? We reply on WhatsApp during working hours.

Ask on WhatsApp

Related services