Toyota HiAce
Long flat sides take a strong horizontal layout. On the high-roof version the tall upper panel sits above parked cars, which makes it the best spot for the name.
Best for: Contractors, maintenance and AC service teams
A van spends its day parked outside your customers' doors. We plan the sides, rear doors and roof of your HiAce, Urvan or chiller van for what each one is seen doing, then file the permit, print and fit.
At a glance
Van branding at Printajo starts at AED 1,500 for a partial wrap and AED 4,000 for a full wrap on a Toyota HiAce, Nissan Urvan or chiller van. Design, cast film, UV laminate and fitting are included; the Mada Media permit is added on its own line. A partial takes 2-3 working days in the bay and a full wrap 3-5.
Panel by panel
A van gets looked at three ways: alongside in traffic, from behind at the lights, and from above when it parks under an apartment block in JLT or Al Nahda. Give each view one job and the van earns more than one with the logo stamped on every panel.
The sides carry the name and what you do, big enough to read across two lanes. The rear doors get the number and website, because the driver behind has time at a red light. The roof is the panel most companies leave white, and it's the one residents see from their balconies.
On most HiAce and Urvan panel vans here, the sliding door is on the kerb side only. So we draw the two sides as two layouts with the same colours and logo size, rather than flipping one file.

Vans we brand
We draw on your model and roof height, not a generic outline. Branding several vans at once? Fleet branding covers rollout and batch permits.
Long flat sides take a strong horizontal layout. On the high-roof version the tall upper panel sits above parked cars, which makes it the best spot for the name.
Best for: Contractors, maintenance and AC service teams
The sides curve harder near the wheel arches. Small text stays off those curves, and colour blocks or photos fill them instead.
Best for: Laundry, cleaning and staff transport
The insulated box gives smooth panels that take print very well. We plan around the cooling unit and its vents and never run film over them.
Best for: Catering, dairy, seafood and pharma delivery
Short stops in residential streets, where people stand at the back and the kerb side. That is where the offer and the number go.
Best for: Courier, e-commerce and grocery delivery
Van prices
Starting prices cover design, printing on cast film, UV laminate and fitting. The Mada Media fee is listed separately on the quote.
from AED 1,500
Sides and rear doors printed and blended into the paint colour. Typical market range AED 1,500-2,500.
from AED 4,000
Every paintable panel covered, including the roof on request. Typical market range AED 4,000-7,500.
from AED 500
Intricate illustration or photo work adds about AED 500-2,000 depending on complexity.
Model, roof height and coverage set the final price, and you get it in writing before work starts. The cost breakdown shows how a van quote is put together.
Design checklist
A van is read a few seconds at a time. The ones that make the phone ring carry less text, not more.
Van film
Printed van sides go on cast film, usually 3M IJ180Cv3 or Avery Dennison MPI 1105, run through our EPSON SureColor printers with original ink and sealed under UV laminate. A HiAce side looks flat, but the swage lines and the recess around the sliding door handle pull the film more than people expect. That's where cheaper calendered vinyl gives up in August.
If your van has rear glass, the design can run across it on perforated one-way film so the driver still sees out. Chiller boxes are smooth GRP and print well; the film simply stops short of the door seals so the doors still shut tight. For a promotion of a couple of weeks on flat panels, economy calendered film can be the sensible choice. The quote will say so, and say that it carries a shorter warranty term.
Warranty on a van
Film and fitting on a van are covered for up to two years under our written warranty, and anything that hasn't settled in the first six months is touched up free. On a working van, trouble shows up in the same few places.
The door opens at every delivery stop. Film there is wrapped into the edge, and a lift caused by our fitting is re-sealed free.
Fingers and fuel nozzles catch these. We trim the film back around each recess; a lift in the first 6 months is a free touch-up.
Hinges flex every time the doors open, so the film is cut at the split and around each hinge instead of bridging them.
Scrapes from a ladder or a rack count as outside damage. Tell us about the rack before design and the roof logo moves to where nothing slides over it.
Permit
Every commercial van needs the Permit to Advertise on Vehicles from Mada Media, which usually takes 3-7 working days. These are the van details that cause the back-and-forth.
The job, step by step
Most vans are with us only on fitting days. Design and permit happen while you're still out on deliveries.
FAQs
Usually, yes. Most delivery and service vans are white, so printed sides and rear doors faded into the paint read as a full design. It starts at AED 1,500 against AED 4,000 for a full wrap, and the van keeps its registered colour, so there is no colour-change paperwork.
Yes. The refrigeration unit, its vents and the door seals are never covered; the film stops short of each one. The insulated box itself is smooth and flat, which makes it one of the easiest surfaces on any van to brand well.
If the van often parks below flats or offices, it's worth it. A plain roof logo is seen from balconies in JLT, Al Nahda and Business Bay. Keep it to the logo, since nobody reads small print from the eighth floor, and skip it if a ladder rack covers the roof.
Only for fitting: about 2-3 working days for a partial wrap and 3-5 for a full one. The design and the Mada Media permit, roughly 3-7 working days, run in the background while the van keeps doing its rounds.
Yes. Contact details are normal on a commercial van and go on the permit mockup with everything else. They can't cover the windscreen, lights or plates. Our permit guide lists the wider design rules.
Yes, when the lift comes from our film or fitting. It's the most worked edge on a van, so we wrap film into it and check it at handover. Send two photos on WhatsApp, one close and one of the whole side; within the first 6 months the touch-up is free, and covered defects are fixed free for the full term.
Yes. Cast film from the brands we use comes off cleanly when it is warmed and peeled by someone who does it daily, and the paint underneath has spent those years out of the sun. Ask us to do it rather than peeling it yourself.
Not answered here? We reply on WhatsApp during working hours.
Ask on WhatsAppRelated services
Fleet BrandingFleet branding in Dubai: one design adapted to every model, batch Mada Media permits and…
Truck BrandingTruck branding in Dubai for pickups, 3-ton and 7-ton box trucks and trailers. 3-ton wraps from AED…
Vehicle Advertising Permit DubaiVehicle advertising permit in Dubai (RTA approval, now Mada Media): car fees from AED 270, the…
Vehicle BrandingVehicle branding in Dubai for cars, vans, trucks and buses: compare wrap levels and prices from AED…Send your vehicle model or artwork and what you need. We reply within working hours, usually the same day, with a written price and timeline.
Fatima Sana and Rupia answer your questions, Mon-Sat 08:00-19:00.
Reply within working hours, usually the same day.
or contact us directly
We reply within working hours (Mon–Sat 08:00–19:00). To speed things up, send photos of your vehicle on WhatsApp.
Continue on WhatsApp